69.99 mhz saw filter 1.26 mhz bandwidth part number: SF0070CD02386S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0070CD02386S rev a 16-feb-2010 ecn 36650 page 1 of 3 description ? 69.99 mhz saw bandpass filter with 1.26 mhz bandwidth for cdma applications. ? 24.6 x 9 mm smp. ? rohs compliant. typical performance horizontal: frequency : 1 mhz/div vertical from top: relative magnitude : 10 db/div relative magnitude : 1 db/div phase linearity : 5 deg/div s11 (64.99 to 74.99 mhz) s22 (64.99 to 74.99 mhz)
69.99 mhz saw filter 1.26 mhz bandwidth part number: SF0070CD02386S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0070CD02386S rev a 16-feb-2010 ecn 36650 page 2 of 3 specification parameter min t yp max units center frequency ( fc) 1 69.99 mhz minimum insertion loss 2 17 20 db lower 1.5 db band ed g e 69.33 69.36 mhz upper 1.5 db band edge 70.62 70.65 mhz lower 14 db band edge 69.21 69.25 mhz upper 14 db band edge 70.73 70.77 mhz lower 25 db band edge 69.09 69.18 mhz upper 25 db band edge 70.80 70.89 mhz passband ripple (fc +/- 0.615 mhz) 0.5 1.0 db p-p phase linearity (fc +/- 0. 615 mhz) 4.5 8 deg p-p input return loss @ fc 10 16 db output return loss @ fc 10 16 db rejection (15 mhz to 61 mhz) 3 40 60 db rejection (61 mhz to 68 mhz) 3 30 38 db rejection (72 mhz to 79 mhz) 3 30 38 db rejection (79 mhz to 140 mhz) 3 40 50 db source and load impedance 50 ? notes: 1. average of the lower an d upper 3 db band edge frequencies. 2. all db values are referenced to the insertion loss. 3. dependent on pc board layout. maximum ratings parameter min max units storage temperature range -40 85 ? c operating temperature range -10 70 ? c input power level 10 dbm matching circuit typical component values: notes: 1. recommend use of +/- 2% tole rance components. minimum q=40. 2. component values are for reference only and may change depending on board layout. ls1 = 220 nh ls2 = 120 nh ls3 = 56 nh cp1 = 120 pf lp2 = 47 nh rp1 = 2.4 k ? rp2 = 3 k ? input 50 ? single-ended output 50 ? single-ended
69.99 mhz saw filter 1.26 mhz bandwidth part number: SF0070CD02386S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0070CD02386S rev a 16-feb-2010 ecn 36650 page 3 of 3 package outline suggested footprint iso 9001 registered all specifications are believed to be accurate and reliable. howe ver, spectrum microwave reserves the right to make changes wit hout notice. ? 2010 all rights reserved. units: mm tolerances are 0.15 mm except for the overall length, width and pad dimensions, which are nominal values. pad configuration: input: 10 input return: 1 output: 5 output return: 6 ground: all other pads index mark package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.3-8.9 m ni plating
|
